Saturday, July 28, 2007

Biochemical and genetic Characterization of a Streptomyces sps from Everest region and chemical characterization of antibiotics produced therefrom.

A Thesis Proposal on

Biochemical and genetic Characterization of a Streptomyces sps from Everest region and chemical characterization of antibiotics produced therefrom.

Principal investigator
Jyotish Yadav
Student from eighth semester
Universal Science College
Pokhara University
Maitidevi, Kathmandu
2007

Supervisor
Upendra Thapa Shrestha
Universal Science College
Pokhara University
RLABB
Maitidevi, Kathmandu

Research Lab
Research Laboratory for AgriculturalBiotechnology and Biochemistry (RLABB)

Maitidevi, Kathmandu


Introduction

Actinomycetes comprise an extensive and diverse group of Gram-positive, aerobic, mycelial bacteria with high G+C nucleotide content (>55%), and play an important ecological role in soil cycle. The name of the group actinomycetes is derived from the first described anaerobic species Actinomyces bovis that causes actinomycosis, the ‘ray-fungus disease’ of cattle. They were originally considered to be intermediate group between bacteria and fungi but are now recognized as prokaryotic microorganisms (Kuster 1968).


The majority of Actinomycetes are free living, saprophytic bacteria found widely distributed in soil, water and colonizing plants. Actinomycetes population has been identified as one of the major group of soil population (Kuster 1968), which may vary with the soil type. They belong to the order Actinomycetales (Superkingdom: Bacteria, Phylum: Firmicutes, Class: Actinobacteria, Subclass: Actinobacteridae). According to Bergey's Manual Actinomycetes are divided into eight diverse families: Actinomycetaceae, Mycobacteriaceae, Actinoplanaceae, Frankiaceae, Dermatophilaceae, Nocardiaceae, Streptomycetaceae, Micromonosporaceae (Holt, 1989) and they comprise 63 genera (Nisbet and Fox, 1991). Based on 16s rRNA classification system they have recently been grouped in ten suborders: Actinomycineae, Corynebacterineae, Frankineae, Glycomycineae, Micrococineae, Micromonosporineae, Propionibacterineae, Pseudonocardineae, Streptomycineae and a large member of Streptomyces are still remained to be grouped (www.ncbi.nlm.nih.gov). Actinomycetes have characteristic biological aspects such as mycelial forms of growth that accumulates in sporulation and the ability to form a wide variety of secondary metabolites including most of the antibiotics.


One of the major groups in actinomycetes is Streptomyces. Streptomyces contains 69-78 mol% of G+C. Substrate and aerial mycelium is highly branched. Substrate hyphae are 0.5-1.0 µm in diameter. In the colony ages aerial mycelia develop into chain of spores (conidia) by the formation of crosswalls in the multinucleated aerial filaments. Conidial wall are convoluted projection which together with the shape and the arrangement of the spore-bearing structure are characteristic of each species of Streptomyces (Anderson et al., 2001). It produces several antibiotics including of aminoglycosides, anthracyclins, glycopeptides, b-lactams, macrolides, nucleosides, peptides, polyenes, polyethers and tetracyclines (Sahin and Ugur, 2003).


Thus investigators turn towards Streptomyces and also other genera of actinomycetes such as Nocardia, Micromonospora, Thermoactinomycetes etc. for isolation of novel antibiotics. No doubt soil is the natural habitat of most of the microorganisms where vast array of bacteria, actinomycetes, fungi and other organisms exist and provided with suitable growth condition and ability to proliferate. Thus most actinomycetes contributing to antibiotic production are screened from soil (Williams and Khan, 1974).

Our prime focus is to find out the novel antibiotic with broad-spectrum antimicrobial activity from Streptomyces isolates of high altitude. And I will do further study in Streptomyces isolates of Khumbu region.


Background

In, RLABB, The first work on the diversity of actinomycestes was started by Singh, D. and Agrawal, V.P. (2002). The research on actinomycetes form Mount Everest was then continued by Pandey, B., Ghimire, P. and Agrawal, V.P. (2004). Still the work is conducting by Baniya R, Guragain M, Sherpa C and Gurung T. Baniya found many actinomycetes with broad-spectrum antimicrobial activity. Among them most of actinomycetes are Streptomyces. Although more research have been done on antibiosis, classification of antibiotic groups and genetic characterization on the basis of 16s rRNA gene have to be done for significant use in medical field. 16s rRNA gene are highly conserved in bacteria. But contain three sequence variable regions among (α, β and γ shown in fig. 1). Among that variation in the sequence of α-(from nucleotide 982 to 998), β-(1102-1122) regions are used of differentiate genus and γ-(158-203) region for the detection of species of bacteria (Anderson et al., 2001). Hence the study will explore more about the genetic property of Streptomyces and chemical property of antibiotics produced by them.



Fig: Secondary structure of 16S rRNA from Streptomyces coelicolor.

Objectives

1. Biochemical and Genetic Characterization of Streptomyces
2. Chemical Characterization of antibiotics from the Streptomyces isolates

Methodology

1. Isolation Purification of Streptomyces


Soil samples will be obtained from Research Laboratory for Agricultural Biotechnology and Biochemistry (RLABB). Isolation of actinomycetes will be performed by soil dilution plate technique using Starch-Casein Agar (Singh and Agrawal, 2002 & 2003). Actinomycetes on the plates will be identified as colored, dried, rough, with irregular/regular margin; generally convex colony as described by Williams and Cross (1971). Streak plate method will be used to purify cultures of actinomycetes (Williams and Cross, 1971, Singh and Agrawal 2002; Agrawal 2003). After isolation of the pure colonies based on their colonial morphology, colour of hyphae, color of aerial mycelium, they will be individually plated on another but the same agar medium.

2. Morphological and Biochemical characterization:



Morphological examination of the actinomycetes will be done by using cellophane tape and cover slip-buried methods (Williams and Cross, 1971; Singh and Agrawal 2002; Singh and Agrawal 2003). The mycelium structure, color and arrangement of conidiophores and arthrospore on the mycelium will be examined under oil immersion (1000X). The observed structure will be compared with Bergay’s manual of Determinative Bacteriology, Ninth edition (2000) for identification Streptomyces spp. Different biochemical tests will be performed to characterize the Streptomyces spp. The tests generally used are gelatin hydrolysis, starch hydrolysis, urea- hydrolysis, acid production from different sugars utilization tests, resistance to NaCl, temperature tolerance test, hydrogen sulphide production test, motility test, triple sugar iron (TSI) agar test, citrate utilization test, indole test, methyl red test, voges-proskauer (Acetoin Production) test, catalase test, oxidase test (Holt 1989; Singh and Agrawal 2002; Singh and Agrawal 2003).

3. Screening of Streptomyces for antimicrobial activity:

3.1 Primary screening
Primary screening of pure isolates will be determined by perpendicular streak method on Muller Hinton agar (MHA). In vitro screening of isolates for antagonism: MHA plates will be prepared and inoculated with Streptomyces isolate by a single streak of inoculum in the center of the petridish. After 4 days of incubation at 28 °C the plates were seeded with test organisms (Bacillus subtilis, Staphylococcus aureus, Enterobacter aerogens, Escherichia coli, Klebsiella species, Proteus species, Pseudomonas species, Salmonella typhi and Shigella species) by a single streak at a 90° angle to Streptomyces strains. The microbial interactions were analyzed by the determination of the size of the inhibition zone.

3.2 Secondary screening
Secondary screening is performed by agar well method against the standard test organism. Fresh and pure culture of each strain from the primary screening will be inoculated in starch casein broth and incubated at accordingly for 7 days in water bath shaker. Growth of the organism in the flask will be confirmed by the visible pellets, clumps or aggregates and turbidity in the broth. Contents of flasks will be filtered through Whatman no.1 filter paper. The filtrate will be used for the determination of antimicrobial activity against the standard test organisms.

4. Genetic Characterization

4.1 DNA extraction: Individual strains will be mass cultured in SC-broth by incubation the broth in shaker water bath for 5-6 days at 28C. Total DNA from corresponding strains will be extracted as described by a modified version of procedure of Kutchma et al. (1998) (Appendix-II).4.2 DNA polymorphisms: DNA polymorphisms among the strains will be studied by Specific-PCR using Universal primers 8F and 1491R that will amplify specifically 16S rDNA. The amplified band will be sequenced for sub species identification (Rivas et al., 2001) (Appendix-III)


5. Fermentation process

Isolates showing the broad-spectrum antimicrobial activity are grown in submerged culture in 250 ml flasks containing 50 ml of broth describe in Sahin & Ugur,2003. The flasks are inoculated with 1ml of active Streptomyces culture and incubated at 28ºc for 7 days with shaking at 500 rpm. After fermentation, fermented broth will filtered through Whatman no.1 filter paper.


6. Extraction of antimicrobial metabolites


Antibacterial compound will be recovered from the filtrate by treating twice with one volume of ethyl acetate (Busti et al., 2006). And after evaporation residue will be used for determination of antimicrobial activity, minimum inhibitory concentration and to perform bioassay of antibiotic (Pandey et al., 2004).


7. Thin Layer Chromatography and Bioautography


Silica gel plates, 10 X 20 cm, 1mm thick, are prepared. They are activated at 150°C for half an hour. Ten micro-liters of the ethyl acetate fractions and reference antibiotics are applied on the plates and the chromatogram is developed using chloroform: methanol (4:1) as solvent system. The plates are run in duplicate; one set is used as the reference chromatogram and the other is used for Bioassay of antibiotic. The spots in the chromatogram are visualized in the iodine vapour chamber and UV chamber (Thangadural et al., 2002 and Pandey et al., 2004).

Expected Outcomes


Being majority of antibiotics producing Actinomycetes are Streptomyces in this research work we have selected two Streptomyces sps with broad spectrum antimicrobial activity. Since these species are from very cold Everest region the organisms as well as antibiotics produced by them may be novel ones.

References


Anderson AS and Wellington EMH (2001) The taxonomy of Streptomyces and related genera. Int J Syst Evol Microbiol 51:797–814


Bergey's manual of determinative bacteriology 2000 Actinomycetales, 9th edition.


Busti E, Monciardini P, Cavaletti L, Bamonte R, Lazzarini A and Sosio et al. (2006) Antibiotic-producing ability by representatives of a newly discovered lineage of actinomycetes. Microbiology 152: 675-683

Holt, J.G. 1989 Bergey's manual of systematic bacteriology, vol 4, ed. S.T. Williams and M.E. Sharpe, Baltimore, Md: Williams and Williams.

Kuster, H.J. 1968 Uber die Bildung Von Huminstoffen durch Streptomyceten. Landwirtsch. Forsch, 21:48- 61


Kutchma, A.J., Roberts, M.A., Knaebel, D.B. and Crawford, D.L. (1998) Small scale isolation of genomic DNA from Streptomyces mycelia or spores. Biotechniques, 24:452-457.


Nisbet, L.J. and F.M. Fox 1991 The importance of microbial biodiversity to biotechnology, In, The biodiversity ofmicroorganisms and invertebrates : its role in sustainable Agriculture, ed.D.L. Hawksworth, 229-224, CAB International.

Pandey, B., Ghimire, P. and Agrawal, V.P. (2004) Studies on Antibacterial Activity of Soil from Khumbu Region of Mount Everest, a paper presented in International Conference on The Great Himalayas : Climate, Health, Ecology, Management and Conservation, Kathmandu, January 12 -15, 2004


Rivas R., Velázquez E., Valverde A., Mateos P.F. and Molina E. M. 2001 A two primers random amplified polymorphic DNA procedure to obtain polymerase chain reaction fingerprints of bacterial species Electrophoresis 22, 1086–1089

Singh, D. and Agrawal, V.P. (2002) Microbial Biodiversity of Mount Everest Region, a paper presented in International Seminar on Mountains - Kathmandu, March 6 – 8, 2002 (organized by Royal Nepal Academy of Science and Technology )


Singh, D. and Agrawal, V.P. (2003) Diversity of Actinomycetes of Lobuche in Mount Everest Proceedings of International Seminar on Mountains – Kathmandu, March 6 – 8, 2002 pp. 357 – 360.

Thangadural S, Shukla SK and Anjaneyulu Y (2002) Seperation and detecrion of certain β-lactan and fluoroquinolone antibiotic drugs by thin layer chromatography. Analytical Science 18: 97-100


Williams, S.T. and T. Cross 1971 Actinomycetes. In: J.R. Norris, D. W. Robbins, (eds), Methods in microbiology, vol.4. London, 295-334, Academic Perss, NewYork.

www.ncbi.nlm.nih.gov.

Saturday, July 14, 2007

A DEMONSTRATIVE MANUAL FOR BASIC MOLECULAR BIOLOGY PRACTICAL

A DEMONSTRATIVE MANUAL FOR
BASIC MOLECULAR BIOLOGY PRACTICAL


FOR THE STUDENTS OF
DEPARTMENT OF MEDICAL MICROBIOLOGY
NOBEL COLLEGE
POKHARA UNIVERSITY
Jul 1-6, 2007


Prepared by

Kiran Babu Tiwari
Asst. Prof. of Microbiology, USC
Research Scientist, RLABB

In association with
Upendra Thapa Shrestha
Nirajan Bhattarai
Vijayendra Agrawal
(Research Scientists, RLABB)


Reference:
Professor Dr. Vishwanath Prasad Agrawal
Executive Director
Research Laboratory for Biotechnology and Biochemistry (RLABB)
www.uscollege.edu.np/rlabb
http://www.rlabb.com.np/
http://www.vpagrawal.com/


Acknowledgement


We are indebted to
Prof. Dr. Vishwanath P. Agrawal,
Executive Director, Research Laboratory for Biotechnology and Biochemistry (RLABB);
Director, Universal Science College; and
Academician, National Academy of Science and Technology (NAST)
for providing the facilities to conduct the experiments enlisted in this manual.


CONTENTS

TITLE PAGE

ACKNOWLEDGEMENT

CONTENTS

JULY 1:
ORIENTATION ON BASIC MOLECULAR BIOLOGY PROCEDURES

JULY 2:
EXPT 1. ISOLATION AND PURIFICATION OF BACTERIAL GENOMIC DNA

EXPT 2. ISOLATION AND PURIFICATION OF RNA

JULY 3:
EXPT 3. ISOLATION AND PURIFICATION OF BACTERIAL PLASMIDS BY ALKALINE LYSIS METHOD
JULY 4:
EXPT 4. SPECTROPHOTOMETRIC ANALYSIS OF DNA

EXPT 5. RESTRICTION DIGESTION OF DNA

JULY 5:
EXPT 6. AGAROSE GEL ELECTROPHORESIS OF DNA

JULY 6:
EXPT 7. POLYMERASE CHAIN REACTION

Day 1
ORIENTATION ON BASIC MOLECULAR BIOLOGY PROCEDURES

1. Principle of nucleic acids isolation from bacteria

Nucleic acids are present as nucleoprotein complexes in cells. The major problems encountered in isolation of pure and intact DNA or RNA molecules are: degradation of high molecular weight nucleic acids by mechanical damage or by hydrolytic action of nucleases, contamination of DNA preparations with RNA and vice versa and contamination of nucleic acids with proteins, polysaccharides and other high molecular weight compounds. Methods have been devised for isolation of nucleic acids from different sources taking adequate precautions to eliminate or minimize the above problems.

The main steps involved in isolation of nucleic acids are:

(a) Disruption of cells: Disintegration of bacterial cells can be achieved by treating them with cell coat hydrolyzing enzyme, i.e. lysozyme in presence of a detergent. at low temperature in buffers containing EDTA (chelates Mg2+ ions which are required for DNase activity). For isolation of RNA, and inhibitor of RNase such as bentonite, diethylpyrocarbonate, placental RNase inhibitor etc. is included in the extraction buffer.

(b) Dissociation of nucleo-protein complexes: The approach employed is such that the proteins either get dissociated or degraded while nucleic acids remain unaffected and intact. This is generally achieved by using detergents like SDS, phenol or broad-spectrum proteolytic enzymes such as pronase or proteinase K. Alkaline pH and high concentration of salts improve efficiency of the process.

(c) Removal of contaminating materials and precipitation of nucleic acids: Proteins are removed by treatment with phenol or mixture of chloroform-isoamyl alcohol or phenol-chloroform. Upon centrifugation, the denatured proteins form a layer at the interface between upper aqueous and lower organic phases, lipids and other contaminants remain in the same organic phase while nucleic acids are recovered in the aqueous phase from which they are precipitated with ethanol. For isolation of DNA, the contaminating RNA is removed by selective salt precipitation or treatment with DNase-free RNase. Conversely while isolating RNA, the preparation is incubated with DNase for eliminating DNA as an impurity.

(d) General precautions while handling nucleic acids:
1. All glasswares and solutions (except organic solvents) should be sterilized.
2. Gloves should be worn to avoid contamination of the experimental material and apparatus with nucleases with occur in fair abundance in skin exudates.
3. Phenol causes severe burns and phenol-containing solutions should, therefore, be handled with care. Thoroughly rinse the burns with large volume of water. Do not use ethanol.
4. For work with RNA, rinse all glasswares with 1% diethylpyrocarbonate solution to inactivate RNase and then autoclave them.

2. Basic components for Molecular Biology experiments

LB (Lauria-Bertani) broth: 0.5% NaCl, 1% Tryptone, 0.1% Yeast extract
Overnight Log- phase culture
Solution I (Lysis buffer): 25mM Tris, 50mM Glucose, Lysozyme [10mg/ml stock; GNB (Gram Negative Bacteria) 0.5mg/ml, GPB (Gram Positive Bacteria) 3-5mg/ml], pH 8.0
Solution II (Lysis): (a) for plasmid isolation: 0.2M NaOH, 10% SDS (b) for genomic DNA isolation: 10% SDS only.
Proteinase K: 10mg/ml stock, 10-20mg/65°C/3hrs
Solution III: 3M Sodium acetate, pH 4.8 by acetic acid
Phenol: distilled, protein precipitant
Chloroform: protein precipitant, phenol solvent
RNase: 5mg/ml stock, 1-2ml
Absolute ethanol/Isopropanol: DNA precipitant, 2.5vol of ethanol or 1vol of isopropanol
70% ethanol: washing DNA precipitant
TE buffer: DNA resuspending buffer, 10mM Tris, 1mM EDTA, pH 8.0; Autoclave before use
TAE buffer: Electrophoresis, 50X, Tris, 24.2gm; acetic acid, 5.71ml; EDTA (0.5M), 11.1ml; DW, 100ml; pH 8.0; Autoclave before use
Loading dye: 6X; 50% Glycerol, 6.0ml; 2%BPB (Bromophenol Blue), 1.0ml; DW, 3ml; Always use sterile DW
Ethidiun Bromide (EtBr)*: 10mg/ml stock (Final concentration: 0.5mg/ml)
λ/HindIII Marker: 23.13Kb, 9.42Kb, 6.56Kb, 2.32Kb, 2.07Kb, 0.56Kb and 0.13Kb
Restriction enzymes: EcoRI and HindIII (10U/ml each)
Restriction enzyme buffers for EcoRI and HindIII (10X each)
Sterile Double distilled water (DDW)
Water bath
Cold centrifuge (upto 20000rpm)
Micropipettes and sterile tips

*Note: EtBr is carcinogen, so, handle with gloves

Day 2

Expt. 1. Genomic DNA extraction from bacteria

-Take 1.5ml of overnight LB-broth culture of bacteria in a MFT (Microfuge tube) and spin at 5000rpm for 10min.

-Remove the supernatant and spin once with same volume as above to collect more cell mass.
-Remove the supernatant.

-Add 100µl Sol. I and keep for 30min at RT (Room temperature).

-Add 1/10 vol. of 10% SDS and swirl to mix.

-Add Proteinase K (1-2 µl) and incubate for 30min at 37ºC with gentle shaking.

-Add 1-2µl of RNase and incubate for 10min at RT.

-Add equal vol. of Phenol:Chloroform (1:1), mix gently and keep for 10min at RT.

-Centrifuge at 8000rpm for 10min at 4ºC and collect the supernatant in a new sterile MFT.

-Add equal vol. of 3M sodium acetate, mix and stand it for an hour in cold.

-Spin at 10000rpm at 4ºC for 15min and wash the pellet with 70% ethanol.

-Dissolve the pellet collected during spin in 50µl TE and store in deep freeze.

Expt. 2. RNA extraction from bacteria

-Take 1.5ml of overnight LB-broth culture of bacteria in a MFT and spin at 5000rpm for 10min.

-Remove the supernatant and spin once with same volume as above to collect more cell mass.

-Remove the supernatant.

-Add 100µl Sol. I and keep for 30min at RT.

-Add 1/10 vol. of 10% SDS and swirl to mix.

-Add Proteinase K (2 µl) and incubate for 30min at 37ºC with gentle shaking.

-Add equal vol. of Phenol:Chloroform (3:1) solution and mix gently.

-Centrifuge at 8000rpm for 10min at 4ºC and collect the supernatant in a new sterile MFT.

-Add equal vol. of 3M sodium acetate and/or two vol. of absolute ethanol. Mix and stand it for 1-2 hour in cold.

-Spin at 15000rpm at 4ºC for 15min and wash the pellet with 70% ethanol.

-Dissolve the pellet collected during spin in 50µl TE (pH 7.0) and store in deep freeze.

Day 3

Expt 3. Plasmid DNA extraction from bacteria

-Take 1.5ml of overnight LB-broth culture of bacteria in a MFT and spin at 5000rpm for 10min.

-Remove the supernatant and spin once with same volume as above to collect more cell mass.

-Remove the supernatant.

-Add 100µl Sol. I and keep for 30min at RT.

-Vortex for a while and add Proteinase K (2µl) and incubate for 30min at 37ºC with gentle shaking.

-Add freshly prepared Sol. IIa (200µl) and mix gently (Do not vortex).

-Add ice cold Sol. III (150µl) and mix gently (Do not vortex).

-Add 1-2µl of RNase and incubate for 10min at RT.

-Add equal vol. of Phenol: Chloroform (1:1), mix gently and keep for 10min at RT.

-Centrifuge at 8000rpm for 10min at 4ºC and collect the supernatant in a new sterile MFT.

-Add equal vol. of isopropanol and stand it for an hour in cold.

-Spin at 13000rpm at 4ºC for 15min and wash the pellet with 70% ethanol.

-Dissolve the pellet collected during spin in 50µl TE and store in deep freeze.

Day 4

Expt. 4. Spectrophotometric analysis of DNA

1. Remove the DNA preparation from the freeze and thaw it.

2. Transfer 495μl TE buffer to a quartz cuvette and add 5μl of the DNA preparation. Mix well.

3. Set the spectrophotometer to 260nm and blank the instrument with TE buffer.

4. Measure the absorbance (A260) of the DNA dilution.

5. Repeat steps 3 & 4 with the spectrophotometer set at 280 nm.

6. Calculate the DNA concentration from A260. [µg/ml = A260 X dilution X 50].

7. Calculate A260/A280 in order to estimate the purity of the DNA preparation (Pure DNA has a A260/A280 ratio of 1.8 – 2.0).

Expt. 5. Restriction digestion of DNA

1. Dilute the DNA extracts, Marker/s and enzymes in suitable solvents accordingly.

2. Calculate the volume for digestion reaction as shown in the table given below.

Components............ Rxn. .........1 Rxn. 2
λ DNA (1µg/µL) ............10 µL ..............-
DNA extract (1µg/µL) ...- ....................10 µL
HindIII (10U/µL) .........1 µL ................1 µL
HindIII buffer (10X) ....1 µL ................1 µL
DW ..................................8 µL ................8 µL
Total ...............................20 µL ..............20 µL

3. Perform digestion reaction by mixing the components in sterile MFT.

4. Briefly centrifuge the contents and keep at 37ºC for 6hrs.

5. Perform agarose gel electrophoresis to interpret the results.


Day 5

Expt. 6. Agarose electrophoresis of DNA

1. Prepare 0.8% agarose gel in 1X TAE buffer (28ml).

2. Dissolve agarose completely in micro-oven and cool to 600C.

3. CAREFULLY, add EtBr into the gel solution to final concentration of 0.5µg/ml.

4. Position a comb in the mold. Pour into gel mold and let it cool for 30 minutes.

5. Pour the TAE buffer into the gel buffer reservoir.

6. Prepare sample taking 20µl of DNA sample and mix with 4µl blue juice.

7. Carefully remove the comb.

8. Load the DNA (15 µl) in the wells, flanking wells with similarly processed DNA size standard.

Note: the amount of the sample that can be loaded in a well depends on the thickness of the gel as well as dimensions and placing of the comb.

9. Put the lid on the gel apparatus; attach the electrodes and adjust voltage to 100 volts.

10. Allow the gel to run until line of blue juice is visible near the end of the gel.

11. Turn off the current and visualize the gel in UV transilluminator.

12. Interpret the results.


Day 6

Expt 7. RAPD-PC(Randomly Amplified Polymorphic DNA – Polymerase Chain Reaction)

1. Thaw the DNA extract and dilute in sterile TE to final concentration with10ng/µl.

2. Prepare reaction mixture as given below:

Components---------- Volume (µl)
PCR buffer (pH 8.3) ----------5
dNTP (2.5mM each) ---------4
Taq polymerase (1U/µl) -----1
Template DNA (10ng/µl) ----1
RAPD-Primer (10µM) -------8
10% DMSO ------------------5
DDW ------------------------26
Final Volume-----------------50

3. Operate the thermal cycler program as given below:
Initial denaturation------- 94ºC-------5mi -----Single step
Denaturation -------------94ºC -------1min
Annealing ----------------36ºC -------1min ----30 Cycles
Extension ----------------72ºC -------2min
Final extension -----------72ºC -------5min ----Single step

4. Perform agarose gel electrophoresis as described in Expt. 6.



Sunday, July 8, 2007

OPTIMIZATION OF RAPD-PCR FOR GENETIC FINGERPRINTING OF BACILLUS THURINGIENSIS

Gyan Sundar Sahukhal1, Upendra Thapa Shrestha1, Kiran Babu Tiwari1, Binod Lekhak2, Anjana Singh2, Viswanath Prasad Agrawal*
(1) Research Laboratory for Agricultural Biotechnology and Biochemistry (RLABB), Universal Science College, Maitidevi, Kathmandu, Nepal;
(2) Central Department of Microbiology, Tribhuvan University, Kirtipur, Nepal

* Corresponding author: gyan633413@gmail.com

ABSTRACT

A random amplified polymorphic DNA fingerprinting assay has been optimized that discriminate different B. thuringiensis isolates. Random amplification of polymorphic DNA (RAPD) is proving to be a useful technique used for screening diversity, particularly at intraspecific levels, including many population studies. Relationships between species' may be determined by comparing their unique fingerprint information, which are expected to be identical among related species. The technique can be troublesome and time consuming to establish due the essentially empirical approach to optimization. By standardization of certain parameters and use of a commercially available PCR buffer, a particularly promising primer was identified and a RAPD condition for a highly discriminatory and reproducible characterization of B. thuringiensis isolates was achieved. In addition, a technique to obtain reproducible RAPD fingerprints of B. thuringiensis without the need to purify genomic DNA described.

Bacteria in Photos

Bacteria in Photos